Mist line shown with cushion clamp, mist nozzle, and standard compression coupling

Rapidcool prefabricated mist line is our mark of quality. This type 316L High pressure stainless steel tube is rated to 3000 PSI and is the ultimate for  quality and value. Prefabricated nozzle spacing is available to match the application. Custom spacing is also available.

Mist line can be painted to match the surroundings or powder coated in many stock colors. 20 ft lengths are the standard (must ship by common carrier) cut to sizes under 108 inches can be shipped by UPS. Nozzle weld fittings are available in 10/24 nozzle thread sizes and tube can be bent with a standard tube bender.

STANDARD 20 FT LENGTHS IN 3/8" OR 1/2" O.D.

Primarily used to route high pressure water from pump to stainless steel mist line. this flexible tube can be directly clamped down or fished through conduit, both in the building, in the ground or under concrete.

Made of virgin nylon this VU protected tube will withstand the most demanding sunlight conditions. With a working pressure of 1000 PSI makes it the first choice of the professional or do it yourselfer.

This tube can be fitted with simple Push Loc fittings or Compression Fittings without using internal reinforcements. Available in cut lengths, or 100, 500 or 1000 FT rolls.

Nozzle Extensions

If you need to direct the misting nozzle away from an object such as a wall or other obstruction, then the nozzle extender will do the job.
This is a simple solution to remedy a problem. The nozzle extender is great for fire pits or landscaping and snaking through a water fall or other yard feature where mist is desired. For mist fog from trees or large plants.

It can be hidden since it is so small and can be painted or just left raw copper and it will patina to a soft green on its own. Nozzle extenders can be made up in any length up to about 8 feet. Available in both 10-24 or 12-24 thread sizes or can be mixed to convert to other thread size.